115濕膜梳 115濕膜梳│易高Elcometer│115濕膜測厚儀
- 公司名稱 深圳市新朗普電子科技有限公司
- 品牌 ELCOMETER/英國易高
- 型號 115濕膜梳
- 產地 115濕膜梳│易高Elcometer│115濕膜測厚儀
- 廠商性質 代理商
- 更新時間 2017/8/18 13:47:04
- 訪問次數 1432
聯系方式:付先生13802268624 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
制造、銷售、維修。國產進口整機測試儀器、儀表與檢定裝置,實驗室設備與電工儀表,工業檢測與干燥試驗設備,各類交直流電源與大功率開關電源,工量具,力學測試,衡器等。
如有任何問題請與我司業務專員:
:豪
:fuhao@17Lp.com
英國易高Elcometer 115濕膜梳
這些精密不銹鋼濕膜梳可重復使用,經久耐用.
Elcometer 115 濕膜梳有公制或者英制可選,厚度范圍zui高可達1270μm 或 50mils。精確度為5% 或 2.5μm (0.01mil),取更大者。
每個濕膜梳有10個測量數值(階齒)
使用濕膜梳
將濕膜梳垂直放置,接觸到基體。保持原地等待幾秒鐘,直到梳齒變濕。拿開濕膜梳.
濕膜厚度在"含漆"或"濕"齒zui大值和"不含漆"或"干"齒zui小值之間
How to use a Wet film Comb - Elcometer Wet Film Measurement
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known (if not contact the coating manufacturer) then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis (lengthways) of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
符合以下標準 | |
AS/NZS 1580.107.3 | ASTM D 4414-A |
BS 3900-C5-7B | ISO 2808-1A |
ISO 2808-7B | NF T30-125 |
US Navy NSI 009-32 | US Navy PPI 63101-000 |
Elcometer 115濕膜梳
范圍 | 階差 | 部件編號 |
1 - 13mils | 1, 1.5, 2, 3, 4, 5, 7, 9, 11, 13mils | B11529451E |
20 - 325μm | 20, 35, 50, 75, 100, 125, 175, 225, 275, 225, 275, 325μm | B11529455M |
2 - 18mils (51 - 457μm) | 2, 3, 4, 6, 8 10, 12, 14, 16, 18mils (51, 76, 102, 152, 203, 254, 305, 356, 406, 457μm) | B11529452 |
2 - 30mils (51 - 762μm) | 2, 4, 6, 8, 10, 10, 15, 20, 25, 30mils (51, 102, 152, 203, 254, 254, 381, 508, 635, 762μm) | B11529453 |
5 - 50mils (127 - 1270μm) | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50mils (127, 254, 381, 508, 635, 762, 889, 1016, 1143, 1270μm) | B11529454 |
相關分類
該廠商的其他產品
- E122-B測試帶 Elcometer 122 Testex®復制帶
- 易高130鹽污染測試儀 Elcometer 130鹽污染測試儀
- 506拉拔式附著力試 Elcometer 506拉拔式附著力試驗儀
- 3086 易高(Elcometer)3086全電動鉛筆硬度計
- 英國易高456超聲波涂層測厚儀 Elcometer 456│易高Elcometer 456整體式涂層測厚儀
- 易高456超聲波涂層測厚儀 Elcometer 456│易高Elcometer 456分體式超聲波測厚儀
- Elcometer 407 三角度光澤度儀407│英國易高Elcometer│407三角度光澤度儀
- 406L 光澤計406L│易高Elcometer│406L單/雙角度微型光澤度儀