CVDI72TPS millipore濾芯
- 公司名稱 上海殷達科學儀器有限公司
- 品牌
- 型號 CVDI72TPS
- 產地
- 廠商性質 經銷商
- 更新時間 2024/8/7 9:46:25
- 訪問次數 202
聯系方式:肖如瑾13801824464 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
millipore濾芯CVDI72TPS
Durapore® CVDI Cartridge Filter 20 in. 0.22 µm Code 7 Silicone
Description Catalogue Number CVDI72TPS Trade Name
Description Durapore® CVDI Cartridge Filter 20in. 0.22µm Code 7 Silicone
Product Information Device Configuration Cartridge Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid) @ 25°C; 1.7 bar (25 psid) @ 80°C; 0.35 bar (5 psid) @ 135°C. Reverse: 3.5 bar (50 psid) @ 25°C, intermittent Cartridge Code Code 7 (2-226) O-rings w/locking-tabs Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Biological Information Media Durapore® Sterility Other Bacterial Retention Samples of the Durapore® membrane used in this cartridge were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10?CFU/cm2 using ASTM®F838 methodology. Wettability Hydrophilic
Physicochemical Information Pore Size 0.2 µm Air Diffusion at 23°C ≤26.6mL/min @ 2.75bar (40psig) in water Bubble Point at 23°C ≥3100mbar (45psig) air with water Gravimetric Extractables The extractables level was equal to or less than 25mg per 10-inch cartridge after 24hours in water at controlled room temperature. Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21CFR177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food. Non-Fiber Releasing This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).
尺寸 | |
---|---|
墨盒公稱長度 | 20 英寸(50 厘米) |
直徑 | 6.9 厘米(2.7 英寸) |
過濾面積 | 1.38 平方米 |
設備尺寸 | 20 英寸 |
材料信息 | |
---|---|
化學 |
|
設備材料 |
|
密封材料 | 硅膠 (SI) |
支持材料 | 聚丙烯 |