您好, 歡迎來到化工儀器網(wǎng)
產(chǎn)品簡介
詳細介紹
- Low capacitance and low inductance design
- Suitable for direct current and technical frequencies
- High stability < ± 0.01 % over years
Application
The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required.Typical main areas of application therefore include:
- When normal resistors prove to be too large scale
- For test and calibration of resistance measurement devices
- For tests on electrical temperature measuring equipment
- For laboratory setup of a Wheatstone bridge
- As shunt resistor for accurate current measurement
- As part of standard equipment in research laboratories
- For a large part of measurements in calibration laboratory.
A test certificate according to ISO 9000 with detailed technical data is included in the scope of delivery of these high-quality calibration resistors.
DKD/DAkkS Calibration Certificate
The calibration laboratory D-K-15141-01-00 at burster praezisionsmesstechnik gmbh & co kg is supervised by DAkkS （Deutsche Akkreditierungssle GmbH） according to ISO 17025.It can prove its status by a certificate and is authorized to issue calibration certificates with the DAkkS logo and with the DKD logo （Deutscher Kalibrierdienst）.
These calibration certificates are internationally approved by multilateral contracts.
Manufacturer Calibration Certifi cate
Please refer to DKD/DAkkS Calibration Certificate but with reduced accuracy. The calibration resistors can also be delivered with a manufacturer calibration certificate. It confirms the traceability of the used secondary voltage and resistance standards to the national standards according to DIN ISO 9000ff and is guaranteed by our certified calibration laboratory （D-K-15141-01-00）如果您對本產(chǎn)品感興趣，請與我們
北京東方安諾生化科技有限公司
: -8012謝
傳真:
Emai: farley668
：www.annovatech.com