現貨 118-09A/B119-44 耐溶劑導電油墨
說明：118-09A/B119-44是一種雙組分、耐溶劑、導電油墨、涂料和
適用于絲網印刷線路的粘合劑。
118-09A/B119-44
SOLVENT-RESISTANT ELECTRICALLY CONDUCTIVE INK

現貨 118-09A/B119-44  耐溶劑導電油墨

說明：118-09A/B119-44是一種雙組分、耐溶劑、導電油墨、涂料和

適用于絲網印刷線路的粘合劑。本產品對卡普頓、聚酯薄膜、玻璃、塑料、聚碳酸酯和其他多種基材。與傳統的導電材料不同，這種產品

抗甲乙酮。它也非?？构蝹驼酆邸?18的一些應用-

09A/B119-44包括但不限于聚酰亞胺撓性電路、聚合物厚膜電路的EMI/RFI屏蔽，

薄膜開關，表面安裝設備的電氣附件，噴鍍氧化銦錫的母線

鉭電容器的表面和陽極涂層。本產品專為與CMI交叉使用而設計

產品116-20，紫外固化電介質。

配合比（按重量計）：A部分B119-44

100 1.5分

適用期：4天。

混合說明：在加入固化劑之前，在原容器中預混料118-09 A部分。增加B119-44

攪拌均勻。此時，可通過添加少量CMI 113-12稀釋劑來稀釋材料。

典型固化特性：

稠度光滑膏

填充銀

銀含量（固化）>85

抗皺性佳

體積電阻（歐姆厘米）0.00005

片材電阻率（ohm/sq./mil）0.019

可焊性編號

水解穩定性優異

有效溫度范圍（攝氏度）-55至200

熱穩定性（攝氏度）達到200

固化計劃：

80°C 4小時

100°C 1小時

125°C，20分鐘。

儲存：25°C下，未開封、未混合的容器中保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間

接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。注：這并不罕見

使B部分結晶。在水浴中加熱至40-45°C，使材料恢復原狀

粘度。結晶不會以任何方式影響產品的性能。

現貨 118-09A/B119-44  耐溶劑導電油墨

118-09A/B119-44
SOLVENT-RESISTANT ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-09A/B119-44 is a two component, solvent-resistant, electrically conductive ink, coating and
adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass,
polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very
resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 118-
09A/B119-44 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry,
membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered
surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI
product 116-20, a UV curable dielectric.
MIX RATIO (by weight): Part A B119-44
100 1.5
Pot Life: 4 days.
MIXING INSTRUCTIONS: Premix 118-09 Part A, in original container prior to adding curing agent. Add B119-44
and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
TYPICAL CURED PROPERTIES:
Consistency Smooth Paste
Filler Silver
Percent Silver (cured) > 85
Crease Resistance Excellent
Volume Resistance (ohm-cm) 0.00005
Sheet Resistivity (ohm/sq./mil) 0.019
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 200
Thermal Stability (°C) Good to 200
CURE SCHEDULE:
80°C 4 Hours
100°C 1 Hour
125°C 20 Min.
STORAGE: Shelf life: 12 months at 25°C, in unopened, unmixed containers.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin. Note: It is not unusual
for crystallization of the Part B to occur. Warm to 40-45°C in a water bath to return the material to it's original
viscosity. The crystallization does not affect the performance of the product in any way.