124-02水性，低V.O.C.，導電油墨和涂料
說明：124-02是一種水性、低V.O.C.導電油墨和涂料，適合應用

通過凹版印刷或柔印。本產品具有與卡普頓、聚酯薄膜、玻璃等多種材料粘合的特點

表面。與傳統的導電材料不同，本產品具有很好的抗彎曲和折痕性能。一些

124-02的應用包括但不限于醫用電極、EMI/RFI屏蔽、聚合物厚膜

電路和薄膜開關。124-02是119-32的高粘度版本。

124-02水性，低V.O.C.，導電油墨和涂料

說明：124-02是一種水性、低V.O.C.導電油墨和涂料，適合應用

通過凹版印刷或柔印。本產品具有與卡普頓、聚酯薄膜、玻璃等多種材料粘合的特點

表面。與傳統的導電材料不同，本產品具有很好的抗彎曲和折痕性能。一些

124-02的應用包括但不限于醫用電極、EMI/RFI屏蔽、聚合物厚膜

電路和薄膜開關。124-02是119-32的高粘度版本。

典型固化特性：

稠度稀液體

抗皺性佳

體積電阻率（Ω-cm）0.0001

片材電阻率，大值（Ω/sq./mil.）0.05

可焊性編號

水解穩定性優異

有效溫度范圍（℃）-55至+140

熱穩定性（攝氏度）達到175

覆蓋面積（平方英尺/加侖，干燥1.0英里）300.79

V.O.C.（克/升）60.8

建議處理和固化：在使用混合料之前，將填料重新懸浮。進一步變薄可能是

通過加入少量蒸餾水來完成。在各種基底上通過

在125℃下固化10分鐘。通過在

溫度范圍為50°C至150°C。建議終用戶通過實驗確定溫度和時間

適合個人應用。

貯存期：21°C下保存6個月。不允許冷凍。

安全和處理：用肥皂和水清洗皮膚。

124-02水性，低V.O.C.，導電油墨和涂料

 124-02
WATERBORNE, LOW V.O.C., CONDUCTIVE INK & COATING
DESCRIPTION: 124-02 is a waterborne, low V.O.C., electrically conductive ink and coating suitable for application
by rotogravure or flexographic. This product features adhesion to Kapton, Mylar, glass, and a variety of other
surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some
applications for 124-02 include, but are not limited to, medical electrodes, EMI/RFI shielding, polymer thick film
circuitry and membrane switches. 124-02 is a higher viscosity version of 119-32.
TYPICAL CURED PROPERTIES:
Consistency Thin Liquid
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.0001
 Sheet Resistivity, max. (Ω/sq./mil.) 0.05
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +140
 Thermal Stability (°C) Good to 175
Coverage (sq. ft./gal. at 1.0 mils dry) 300.79
V.O.C.’s (grams/liter) 60.8
SUGGESTED HANDLING & CURING: Before using mix well to re-suspend filler. Further thinning may be
accomplished by adding small amounts of distilled water. Best properties are obtained on a variety of substrates by
curing for 10 minutes at 125°C. Good properties are also obtained on a variety of substrates by curing at
temperatures ranging from 50°C to 150°C.End user is advised to experimentally determine temperature and time
best suited for individual applications.
STORAGE: Shelf Life: 6 months at 21°C. DO NOT ALLOW TO FREEZE.
SAFETY & HANDLING: Wash with soap and water to remove from skin.