112-48 CONDUCTIVE INK導電油墨
說明：112-48是一種導電油墨/涂料，用于絲網印刷、浸漬和

注射器分配。該產品對卡普頓、聚酯薄膜、玻璃和其他各種材料具有良好的附著力。

基質。與傳統的導電材料不同，這種產品非常耐磨、耐刮擦，

彎曲和折痕。112–48的一些應用包括但不限于聚酰亞胺的emi/rfi屏蔽

柔性電路、聚合物厚膜電路和薄膜開關。112-48是125-15的碳版。

112-48 CONDUCTIVE INK導電油墨

說明：112-48是一種導電油墨/涂料，用于絲網印刷、浸漬和

注射器分配。該產品對卡普頓、聚酯薄膜、玻璃和其他各種材料具有良好的附著力。

基質。與傳統的導電材料不同，這種產品非常耐磨、耐刮擦，

彎曲和折痕。112–48的一些應用包括但不限于聚酰亞胺的emi/rfi屏蔽

柔性電路、聚合物厚膜電路和薄膜開關。112-48是125-15的碳版。

典型特性：

粘度（cps）15000–20000

填充碳

抗皺性佳

大體積電阻（Ω-cm）0.05

片材電阻率（Ω/平方/mil）20

水解穩定性優異

有效溫度范圍（攝氏度）-55至200

建議的處理和固化：112-48已準備好供應使用。進一步變薄可能是

通過添加少量CMI稀釋劑112-18、112-19和/或105-36來完成。使用前

一定要混合好再使用填料。在大多數應用中，固化3到5年后，性能佳

在110°C下保持分鐘。通過在溫度下固化，在多種基底上也獲得優異的性能

溫度范圍為50°C至175°C。建議終用戶通過實驗確定溫度和時間

適合個人應用。

貯存期：25℃下保存2個月；5℃下保存6個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

112-48 CONDUCTIVE INK導電油墨

 112-48
CONDUCTIVE INK
DESCRIPTION: 112-48 is an electrically conductive ink/coating for application by screen-printing, dipping and
syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other
substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching,
flexing and creasing. Some applications for 112–48 include, but are not limited to, emi/rfi shielding of polyimide
flexible circuits, polymer thick film circuitry, and membrane switches. 112-48 is a carbon version of 125-15.
TYPICAL PROPERTIES:
Viscosity (cps) 15,000 – 20,000
Filler Carbon
Crease Resistance Excellent
Volume Resistance, max. (Ω-cm) 0.05
Sheet Resistivity (Ω/square/mil) 20
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 200
SUGGESTED HANDLING & CURING: 112-48 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of CMI thinner #112-18, #112-19 and/or #105-36. Prior to use, be
certain to mix well to resuspend fillers. Best properties, for most applications, result when cured for 3 to 5
minutes at 110°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures
ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best
suited for individual applications.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.