化工儀器網
詳細介紹
液化氮低溫微管密封機系統，CRYOPROOF™ 313 TUBE SEALER，MICROTUBE SEALER，低溫管密封機，
RYOPROOF™313密封管
微型管的制造商不建議將其存儲在低溫條件下，因?yàn)橐夯锌赡芡ㄟ^蓋滲入管中。當前的方法是使用熱槍將整個管子手動包裹在熱縮管中。 CryoProof 313是一種創新且獲得zhuan利的管子密封機，它可以自動熱收縮一條短的塑料管，從而僅密封低溫管的蓋子，并確保在幾秒鐘內實現防漏密封。密封減少了低溫存儲過程中由于非常冷的空氣或液氮滲入試管或從試管中釋放有害樣品而造成的有價值樣品潛在的損失。
CryoProof密封過程由微處理器控制，只需將管子放入支架中，將熱縮管放在帽上，然后按一下按鈕即可。一束熱空氣收縮將管子纏繞在蓋子上，作為旋轉管，形成無縫且均勻的密封?？梢钥刂苼碜訡ryoProof的熱空氣的溫度，并且光束僅聚焦在旋轉帽上。與使用熱風槍手動壓接和壓接塑料管的熱端相比，密封的結果更加一致和可靠。通過密封蓋而不是整個管子，您仍然可以將管子放在其常規架子上，以便在密封后易于存放和識別。
特征
微處理器控制的精度和可重復性
加熱時間短，密封
僅密封蓋以便以后存放
可調溫度和時間以優化給定管的密封條件
在此過程中，管子的旋轉可確保均勻無縫的密封
窄束的熱空氣僅對準管帽，以便生物
樣品不會受到熱影響
支架可容納各種尺寸的管
LOOP按鈕，多可選擇30個密封行程
STOP按鈕隨時終止
CRYOPROOF™ 313 TUBE SEALER SPECIFICATIONS
| MODEL | CRYOPROOF 313 |
| TEMPERATURE | |
| Controller | PID microprocessor temperature controller with auto tuning |
| Accuracy | ±0.1°C |
| Display | LED |
| HEATING TIME | |
| Range | 5 to 15 seconds |
| Control | Microprocessor controlled |
| Display | LED |
| SEALING | |
| Method | Microprocessor-controlled heat shrinking of plastic |
| Temperature | Up to 300°C |
| Programmability | Seals up to 30 tubes sequentially |
| TUBE SIZES | Various |
| HEATER | 800 watts |
| SAFETY FEATURES | |
| Over-Temp. Protection | Power cutoff to the heater in case of over-heating |
| Safe Cool Down | Internal fan cools down the system after the process, even in the event of a power failure |
| Emergency Stop Key | Process terminates when this key is pressed |
| Safety Cage | Minimizes the potential for burns |
| OVERALL DIMENSIONS | 10.5"W x 13.2"D x 11.9"H (267 x 335 x 302) mm |
| POWER | 120VAC, 50/60 Hz, single phase (220V available) |
| WARRANTY | 1 year |
化工儀器網