Chamber-incubator微型培養箱CSC

Chamber-incubator微型培養箱CSC

Chamber-incubator for replaceable round coverslips, CSC
Can be used for imaging and recording. Consists of a bottom base, and a silicone O-ring to seal the
coverslip. There is no contact between solution and the chamber base to prevent ions leakage. The
included top glass coverslip can be used to seal your sample from top as well - to from a micro-incubator.
The top can be secured using the included metal ring, or using flat springs of microscope adapters. The
bottom part has a recessed profile to fit round coverslips. Overall diameter is the same as standard Petr
dishes. The included O-rings allows using different thickness coverslips. Simply put the coverslip inside
and seal it with silicone ring by a snap-in action. Can be secured with a top metal ring. The silicone ring
can be also secured by flat springs of microscope adapters. For low-profile chambers, consider CSC-2
design, where no top clamps are required. Can be used as a perfusion chamber, if combined with miniature
tubing holders. The metal base facilitates heat transfer. Fits to heating stages and non-heated stages.
Item#: CSC
• Outside diameter: 36 mm
• Height: 8.5mm (with top metal ring)
• Working volume:
25mm coverslip - 21mm, approx. 350 microl
22x22mm coverslip - 19mm, approx. 280 microl
20mm coverslip - 16mm, approx. 200 microl
18mm coverslip - 14mm, approx. 150 microl
13mm coverslip - 9mm, approx. 50 microl
12mm coverslip - 8mm, approx. 50 microl
10mm coverslip - 6mm, approx. 30 microl

用于更換圓形蓋玻片的培養箱，CSC

可用于成像和記錄。包括底部底座和密封

床單。溶液和腔室底座之間沒有接觸，以防止離子泄漏。這個

隨附的頂部玻璃蓋玻片可用于密封您的樣品從頂部以及從一個微型培養箱。

頂部可以用附帶的金屬環或顯微鏡適配器的平彈簧固定。這個

底部有一個凹陷的輪廓，以適合圓形蓋瓦。總直徑與標準Petr相同

菜。隨附的O形圈允許使用不同厚度的蓋片。把床單放進去

然后用硅膠環卡入密封?？梢杂庙敳拷饘侪h(huán)固定。硅膠環

也可以用顯微鏡適配器的平彈簧固定。對于低剖面腔室，考慮CSC-2

無需頂部夾具的設計?？勺鳛楣嘧⑹?，如果與微型

油管固定器。金屬底座有利于傳熱。適用于加熱階段和非加熱階段。

物品#：CSC

•外徑：36 mm

•高度：8.5mm（帶頂部金屬環）

•工作容積：

25毫米蓋玻片-21毫米，約350微升

22x22毫米蓋玻片-19毫米，約280微升

20毫米蓋玻片-16毫米，約200微升

18mm蓋玻片-14mm，約150微升

13mm蓋玻片-9mm，約50微升

12毫米蓋玻片-8毫米，約50微升

10毫米蓋玻片-6毫米，約30微升

 注：楊清辰發布