CO2加熱和缺氧控制的微型培養箱TC-CSC-I型

CO2加熱和缺氧控制的微型培養箱TC-CSC-I型

CO2加熱和缺氧控制的微型培養箱

TC-CSC-I加熱CO2和缺氧控制微型培養箱用于蓋玻片，

TC-CSC-I培養箱可與圓形可更換蓋玻片長期使用

延時高分辨率成像。配有薄的高光學質量玻璃罩，防止蒸發

（可以移除）。易于使用：只需將樣品蓋滑入保持架，用硅密封

腔室，并用頂環固定。溶液和腔室底座之間沒有接觸

防止離子泄漏。底部有一個凹進的輪廓來安裝圓形蓋滑動氣密密封件

可防止介質蒸發數小時。包括一個溫度傳感器和一個加熱元件

30個

溫度控制TC2-80-150-C。需要二氧化碳控制器。需要顯微鏡適配器。

訂購時的顯微鏡型號。可升級為帶有目標加熱器的浸入式光學元件。項目#

TC-CSC-I型

Heated Micro incubator with CO2 and hypoxia control for coverslips,
TC-CSC-I Heated Micro incubator with CO2 and hypoxia control for coverslips,
TC-CSC-I The incubator can be used with round replaceable coverslips for long-term
time-lapse high resolution imaging. Comes with thin high optical quality glass cover to prevent evaporation
(can be removed). Easy to use: simply drop the sample coverslip into the holder, seal with silicon
chamber, and secure with the top ring. There is no contact between solution and the chamber base to
prevent ions leakage. The bottom part has a recessed profile to fit round coverslips The air-tight seal
will prevent media evaporation for hours. Incorporates a temperature sensor and a heating element for 
30
temperature control TC2-80-150-C. Requires a CO2 controller. Requires a microscope adapter. Specify
microscope model when ordering. Can be upgraded with an objective heater for immersion optics. Item#
TC-CSC-I

 注：楊清辰發布