詳細介紹
Objective Heater帶溫控器的柔性硅酮加熱器
Objective Heater帶溫控器的柔性硅酮加熱器
帶溫控器的柔性硅酮加熱器
為了任何目標。與浸油或浸水光學元件一起使用。包括易于斷開的電纜和
溫度傳感器。易于安裝和拆卸。只需將加熱器纏繞在目標上并固定
包括尼龍搭扣帶。加熱器通常安裝在物鏡的圓柱面上
給樣品。尺寸:0.5 x 5英寸,厚度小于1毫米。項目#:MTC-HLS-025
•尺寸:0.5英寸。寬x長5英寸
•溫度穩定性:優于0.01℃,
自動調節,內置傳感器,雙過熱
保護
•易于安裝:適合任何目標
物鏡加熱器
目錄號說明
MTC-HLS-025帶溫控器的物鏡加熱器,0.5x5in
Objective Heater with temperature controller A flexible silicone heater
for any objective. Used with oil or water immersion optics. Includes easy disconnect cable and incorporates
a temperature sensor. Easy to attach and remove. Simply wrap the heater around objective and secure
it with included Velcro tape. The heater is usually attached to a cylindrical surface of the objective, closer
to the sample. Dimensions: 0.5 x 5 in., less than 1mm thick. Item#: MTC-HLS-025
• Dimensions: 0.5in. wide x 5in long
• Temperature stability: better than 0.01°C,
self-adjusting, built-in sensor, dual overheating
protection
• Easy to install: Fits any objective
Objective heaters
Catalog No. Description
MTC-HLS-025 Objective Heater with temperature controller, 0.5x5in
注:楊清辰發布