詳細介紹
PetriDishInsertPDI培養皿插件PDI自粘墊圈
PetriDishInsertPDI培養皿插件PDI自粘墊圈
培養皿插件PDI和自粘墊圈
將培養皿放入灌注室。生物相容性墊片與
盤子的底面,即使盤子里裝滿了介質或表面不平整。簡單地按
在盤子底部插入幾秒鐘,在盤子里形成一個灌注系統。這個
低3毫米剖面允許您使用記錄電極、垂直顯微鏡和浸水
目標也是。工作容積?。旱撞?jī)?nèi)徑11mm,19號圓錐孔
在上面。該室有兩個單獨的開口,用于溶液流入和流出,以防止氣泡
從工作間進來。層流輪廓有助于灌注,并提供更快的速度
解決方案交換??膳c50毫米玻璃底盤一起使用,以便于浸水進入
目標。項目#:PDI
•外徑:35mm
•高度:3毫米
•工作容積:直徑11mm,約。
100微升、
Petri Dish Insert PDI and Self-Adhesive Gaskets The insert converts a regular
petri dish into a perfusion chamber. The biocompatible gasket form airtight and leak-proof contact with
the bottom surface of the dish, even if the dish is filled with media or has an uneven surface. Simply press
the insert to the bottom of the dish for a few seconds to form a perfusion system right in your dish. The
low 3 mm profile allows you to use recording electrodes, upright microscopes with water immersion
objectives as well. It has small working volume: conical opening with 11 mm I.D. on the bottom and 19
mm on the top. The chamber has two separate openings for solution inflow and outflow to prevent bubble
from entering the working compartment. The laminar profile facilitates perfusion and provides faster
solution exchange. Can be used with 50mm glass bottom dishes for easy access with water immersion
objectives. Item#: PDI
• Outside diameter: 35mm
• Height: 3mm
• Working volume: 11mm diameter, approx.
100 microl
注:楊清辰發布