OpenChamberfor CoverslipsCSC蓋玻片開口室

OpenChamberfor CoverslipsCSC蓋玻片開口室

可用于成像和記錄。由底部底座和密封蓋滑套的硅膠O形圈組成。

溶液和腔室底座之間沒有接觸，以防止離子泄漏。包括的頂部玻璃

蓋玻片可以用來密封樣品從頂部到微型培養箱。頂部可以是

使用附帶的金屬環或顯微鏡適配器的平彈簧固定。底部有一個

凹進型面，適合圓形蓋卡瓦。所有地方的直徑都與標準培養皿相同，包括的ORING允許使用不同厚度的蓋玻片。只需將蓋玻片放在里面并用硅膠密封即可

一個快速的動作?？梢杂庙敳拷饘侪h(huán)固定。硅膠環也可以用平的

跳躍或顯微鏡適配器。對于低剖面腔室，考慮CSC-25設計，沒有頂部夾具

是必需的?？勺鳛楣嘧⑹?，如果結合微型管支架。金屬

堿促進傳熱。適合暖氣實習和非暖氣實習。項目'35；：CSC

外徑：36mm

高度：8.5mm（帶頂部金屬環）

工作容積：

25毫米蓋唇-21毫米，約350微升

20毫米蓋唇-16毫米，約200微升

18mm蓋唇-14mm，約150微升

13mm蓋唇-9mm，約50微升

12毫米蓋唇-8毫米，約50微升

10毫米蓋唇-6毫米，約30微升

Open Chamber for Coverslips CSC
Can be used for imaging and recording. Consists of a bottom base, and a silicone O-ring to seal the coverslip.
There is no contact between solution and the chamber base to prevent ions leakage. The included top glass
coverslip can be used to seal your sample from top as well - to from a micro-incubator. The top can be
secured using the included metal ring, or using flat springs of microscope adapters. The bottom part has a
recessed profile to fit round coverslips. Overall diameter is the same as standard Petri dishes The included Orings allows using different thickness coverslips. Simply put the coverslip inside and seal it with silicone
ring by a snap-in action. Can be secured with a top metal ring. The silicone ring can be also secured by flat
springs of microscope adapters. For low-profile chambers, consider CSC-25 design, where no top clamps
are required. Can be used as a perfusion chamber, if combined with miniature tubing holders. The metal
base facilitates heat transfer. Fits to heating stages and non-heated stages. Item#: CSC
• Outside diameter: 36 mm
• Height: 8.5mm (with top metal ring)
• Working volume:
25mm coverslip - 21mm, approx. 350 microl
20mm coverslip - 16mm, approx. 200 microl
18mm coverslip - 14mm, approx. 150 microl
13mm coverslip - 9mm, approx. 50 microl
12mm coverslip - 8mm, approx. 50 microl
10mm coverslip - 6mm, approx. 30 microl

 注：楊清辰發布