Low Profile Small Volume Laminar Perfusion Chamber 

Low Profile Small Volume Laminar Perfusion Chamber 

低剖面小體積層流灌注腔-

卡瓦，PCCS2

內徑只有10毫米。該室有兩個單獨的開口，用于溶液流入和流出

提供流暢的灌注，防止氣泡進入。低姿態允許輕松訪問

電極、移液管和浸入式光學元件。與微型支架結合，形成灌注系統。

使用方便，只需松開蓋玻片上的粘合層（即使介質仍然存在），然后將

從頂部開始。蓋玻片閃爍在倒角的底部。

腔室是由聚碳酸酯制成的。它只有5.5毫米厚（高）。艙底是

可更換的30mm圓形蓋玻片。蓋玻片通過粘合層連接到腔室

（或任何粘合劑，甚至融化的蠟）。使用后易于清潔。注：任何厚度30mm均可使用

床單。

腔體適合顯微鏡臺內適配，訂貨時顯微鏡型號。密室

可在臺內旋轉以提供所需的樣品方向。非標準的自定義階段

可根據要求提供顯微鏡。

螺桿式或磁性管/電極保持器甚至延長了這種靈活性。它們可以被定位

在腔室周圍的任何地方，這樣管子就不會妨礙目標或記錄電極。

此外，夾持器可以調整角度，因此，管子可以從任何

方向。支架安裝在灌注管上。它們也可用于定位參考電極

或者是溫度探頭，甚至是輸送氣體（比如氧氣）的管道。MTH-S公司

不銹鋼吸管提供流暢的灌注。如果你打算在灌注期間使用這個系統

實驗中，你所需要的只是一個流出裝置，用于抽吸，以便在灌注過程中去除溶液?？梢允?/p>

用于成像和記錄。也可與50毫米BD Falcon和Willco玻璃底盤一起使用。

項目#：PCCS2

•外徑：35mm

•高度：4毫米

•工作容積：直徑11mm，約。

100微升

灌注室

目錄號說明

用于30mm玻璃蓋玻片的PCCS2小容量灌注室

或50毫米玻璃底盤

PCCS2-PDI粘合層，每包50個，用于PCCS2灌注

錢伯斯。

PLD22x40層流剖面灌注室

用于層流灌注室的PLDA適配器

MA-MTH微型磁保持架套件，x3。包括不銹鋼

吸入管。

磁性顯微鏡適配器。顯微鏡

訂購時提供型號。

IMA顯微鏡適配器，顯微鏡型號

IMA-MH微型可調支架套件，x3

 Low Profile Small Volume Laminar Perfusion  Chamber for Cove -
slips, PCCS2
Inside diameter is only 10 mm. The chamber has two separate openings for solution inflow and outflo
to provide smooth perfusion and prevent bubbles from coming in. Low profile permits easy access with
electrodes, pipettes and immersion optics. Combined with miniature holders, forms a perfusion system.
Easy to use, simply release adhesive layer on the coverslip (even with media still present), and attach the
chamber from the top. Coverslip is flashed on the bottom of the chambe .
The chamber is made out of polycarbonate. It is only 5.5 mm thick (high). The bottom of the chamber is
a replaceable 30mm round coverslip. The coverslip is attached to the chamber by using adhesive layers
(or any adhesive, even melted wax). Easy to clean after use. Note: Can be used with any thickness 30mm
coverslips.
The chamber fits inside microscope stage adapte , specify microscope model when ordering. The chamber
can be rotated inside the stage to provide required orientation of the sample. Custom stages for non-standard
microscopes are available upon request.
Screw-type or magnetic tubing/electrode holders extend this flexibility even furthe . They can be positioned
anywhere around the chamber, so that tubing is not in the way of objectives or recording electrodes.
Furthermore, the holders can adjust the angle and, as a result, tubing can approach the sample from any
direction. The holders fit to perfusion manifolds. They also can be used to position reference electrodes
or temperature probes, or even tubing to deliver gases, for example oxygen, over the sample. MTH-S
stainless suction tubing provides smooth perfusion. If you are planning to use this system during perfusion
experiments, all you need is a outflow unit for suction to remove solution during perfusion. Can be
used for imaging and recording. Can be also used with 50mm BD Falcon and Willco glass bottom dishes.
Item#: PCCS2
• Outside diameter: 35mm
• Height: 4mm
• Working volume: 11mm diameter, approx.
100 microl
Perfusion Chambers
Catalog No. Description
PCCS2 Small Volume Perfusion Chamber for 30mm Glass Coverslips
or 50mm Glass Bottom dishes
PCCS2-PDI Adhesive layers, pack of 50, for use with PCCS2 perfusion
chambers.
PLD22x40 Laminar Profile Perfusion Chamber
PLDA Adapter for Laminar Perfusion Chamber
MA-MTH Miniature Magnetic Holders Set, x3. Includes stainless
suction tubing.
MA Magnetic microscope adapter. Specify microscope
model when ordering.
IMA Microscope Adapter, specify microscope model
IMA-MH Miniature Adjustable Holders Set, x3

注：楊清辰發布