Adapters 電動舞臺適配器現貨

Adapters 電動舞臺適配器現貨

電動舞臺適配器

目錄號階段模型

不需要Ludl、Prior、ASI、Marhauser、蔡司和K型舞臺

用于ThorLabs級的TC-MI-THOR適配器，170x130mm

TC-MI-NIK適配器，適用于尼康電動舞臺，236x155mm

用于LUDL Bioprecision II級的TC-MI-LUDL適配器，172x11mm

•外形尺寸：適合160x110毫米

電動舞臺的切口；高度10毫米

底部在底座下方7毫米處凹陷

表面；帶有3毫米的墊片以減少

此凹陷輪廓為5mm；可調平

通過安裝在

基地。

•光圈：112x72mm

•與：板和可選插入件一起使用

床單架，35-60mm盤子，和

1×3英寸。玻璃罩玻璃/幻燈片。

•介質交換和灌注：2

帶進出口的可選側桿

兩邊都有開口

底座的；可選的油管接頭套件

螺紋端口；魯爾鎖或帶刺連接器

液體介質來源；可選

一套可調管架就位

sampl內的流入和流出管

錢伯斯。

Adapter for motorized and type K stages, IMA-motor This standard
160x110mm insert fits most motorized and type K stages. Extensions to fit l ger motorized stages from
Nikon, ThorLabs and Ludl Bioprecision, for example, are available (see the table below). Standard multiwell
128x86mm plates fit inside this base. The base can be used with various 128x86mm inserts, including
MA-128x86 magnetic insert, for heating elements, glass bottom (35/50mm) and regular different size Petri
dishes, as well as coverslip CSC holders and cover glasses. Miniature magnetic and screw-type holders
can be attached to the surface of these inserts to fix perfusion tubing, electrodes, and sensors. Most inserts
include fixing clamps and thumb screws, plus the reducing ring for 35mm dishes. Shown on the picture is
IMA-motor adapter with IMA-74-128x86 insert and 50mm heating element attached.. Item#: IMA-motor
Adapters for motorized stages
Catalog No. Stage Model
Not required Ludl, Prior, ASI, Marhauser, Zeiss, and type K stages
TC-MI-THOR Adapter for ThorLabs stages, 170x130mm
TC-MI-NIK Adapter for Nikon motorized stages, 236x155mm
TC-MI-LUDL Adapter for Ludl Bioprecision II stages, 172x116mm
• Outside dimensions: Fits 160x110mm
cutout of motorized stages; height 10mm; the
bottom is recessed 7mm below the mounting
surface; comes with 3mm spacers to reduce
this recessed profile to 5mm; can be leveled
by set screws positioned in the corners of
base.
• Optical aperture: 112x72mm
• Use with: plates, and optional inserts for
coverslip holders, 35-60mm dishes, and
1x3in. glass coverglasses/slides.
• Media exchange and perfusion: Two
optional side bars with inflow/outflow port
and openings can be attached on both sides
of the base; optional tubing fitting kit for
the threaded ports; luer-lock or barbed connectors
to sources of liquid media; optional
sets of adjustable tubing holders to position
inflow and outflow tubing inside sampl
chambers.

 注：楊清辰發布