化工儀器網
產品簡介
四合一安規測試儀5880,安規測試儀廠家蘇州賽秘爾,抗干擾性強,*！故障率低！應用于電源，電器，安規，家用電器，航*用電源，LED驅動電源，照明等測試！
詳細介紹
四合一安規測試儀5880,安規測試儀廠家蘇州賽秘爾,,抗干擾性強,*！故障率低！應用于電源，電器，安規，家用電器，航*用電源，LED驅動電源，照明等測試！
四合一安規測試儀5880,安規測試儀廠家產品特點
- 交直流耐壓、絕緣阻抗、接地電阻測試
- 超大型240*128 Graphic LCD 視窗
- 可選配內建4組或8組高硬度矩陣式掃描通道
- 內建50組程式記憶、每組8個測試步驟可程式記憶步驟的連接測試
- 測試線路阻抗自我歸零校整功能，確保測試結果的準確
- 內建PLC Remote遙控界面
- 鍵盤鎖定功能
- 可選配GPIB/RS232 Interface Card
技術參數
| MODE | 5850 | 5860 | 5880 |
| AC WITHSTAND VOLTAGE | |||
| Output Rating | 5KVAC/30mA | 5KVAC/30mA | 5KVAC/40mA |
| Range | Resolution | Accuracy | |
| Output Voltage ACV | 5000 | 1 | ±(1% of setting +5V) |
| Output Frequency | 50HZ/60HZ ±0.1%,User Selection | ||
| Output Waveform | Sine Wave,THD<2%(Resistive Load),Crest Factor=1.3-1.5 | ||
| Output Regulation | ±(1% of output+5V),From no load to full load | ||
| SETTINGS | |||
| Hi-limit AC Current,mA | 0-30.00 | 0-30.00 | 0-40.00 |
| Resolution:0.01, Accuracy: ±(1% of setting +3counts) | |||
| Lo-limit AC Current,mA | Range:0-9.999 | ||
| Resolution:0.001,Accuracy: ±(1% of setting +3counts) | |||
| Ramp Time second | 0.1-999.9 | 0.1 | ±(0.1% of setting +0.05sec) |
| Dwell Time second | 0,0.3-999.9 (0=continuous) | 0.1 | ±(0.1% of setting +0.05sec) |
| ARC Detection | 1-9 range (9is the most sensitivity) | ||
| Ac Current Office ,mA | 0-2.000 or Auto Set | ||
| DC WITHSTAND VOLTAGE | |||
| Output Rating | 6KVAC/9999uA | ||
| Range | Resolution | Accuracy | |
| Output Voltage DCV | 6000 | 1 | ±(1% of setting +5V) |
| Output Ripple | <5%(6KVA/9999Ua at Resistivity Load) | ||
| SETTINGS | |||
| Hi-limit DC Current,mA | 0-9999 | 1 | ±(1% of setting +3counts) |
| Lo-limit DC Current,mA | 0-999.9 | 0.1 | ±(1% of setting +3counts) |
| Ramp Time second | 0.1-999.9 | 0.1 | ±(0.1% of setting +0.05sec) |
| Dwell Time second | 0,0.4-999.9 (0=continuous) | 0.1 | ±(0.1% of setting +0.05sec) |
| ARC Detection | 1-9 range (9is the most sensitivity) | ||
| DC Current Office ,mA | 0-200.0 or Auto Set | ||
| Ramp High,Current | ON/OFF,User Selection | ||
| Charge-Low Current,uA | 0-350.0 or Auto Set | ||
| Discharge Time | ≤200 msec | ||
| INSULATION RESISTANCE | |||
| Output Rating | 1KVDC/9999 MΩ | ||
| Output Voltage DCV | 100-1000 | 1 | ±(1% of setting +3V) |
| Hi-limit Resistance MΩ | 0.1-9999(0=OFF) | 1 | ±(1% of setting +2counts) at 500-1000VDC, 1-999. 9 MΩ |
| Lo-limit Resistance MΩ | 0.1-9999(0=OFF) | 1 | ±(8% of setting +2counts) at 500-1000VDC, 1000-9999 MΩ ±(8% of setting +2counts) at 100-499VDC, 1-9999 MΩ |
| Delay Time second | 0,0.5-999.0 (0=continuous) | 0.1 | ±(0.1% of setting +0.05sec) |
| Charge-Low Current,uA | 0-3.500 or Auto Set | ||
| GROUND BOND (5880S ONLY) | |||
| Output Rating | 30A/600mΩ,8V | ||
| Output AC Current,A | 3.00-30.00 | 0.01 | ±(1% of setting +3counts) |
| Output AC Voltage,V | 3.00-8.00 | 0.01 | ±(1% of setting +3counts)at Open circuit |
| Output Frequency | 50HZ/60HZ ±0.1%,User Selection | ||
| SETTINGS | |||
| Hi-limit Resistance mΩ | 0-150(3-30A) | 1 | ±(1% of setting +2counts) |
| Lo-limit Resistance mΩ | 0-600(3-10A) | 1 | ±(1% of setting +2counts) |
| Laed Resistance Offset mΩ | 0-200 | 1 | ±(1% of setting +2counts) |
| Dwell Time second | 0,0.5-999.9 Sec(0=continuous) | 0.1 | ±(0.1% of setting +0.05sec) |
| GENERAL | |||
| Input Voltage AC | 115/230VAC±15%,50/60HZ±5%,Max.Current 6.3A | ||
| PLC Remote Control | Input: Test, Reset ,Momeory1.2.3 Output:Pass,Fail,Processing | ||
| Rear Pancl Output | YES | YES | YES |
| Built-in Scanner Module | NO | 8Channels | Option |
| External Scanner Port | YES | YES | YES |
| RS232 Interface | YES | YES | YES |
| GPIB Interface | Option | Option | Option |
| Environment | 0-40℃,20-80%RH | ||
| Dimension(W*H*D) | 430*133*300(mm) | 430*133*500(mm) | 430*133*500(mm) |
| Net Weight) | 12Kg | 18Kg | 22Kg |
安規測試儀5880訂購資訊
- 5850 Dielectric Analyzer(ACW,DCW,IR)
- 5860 Dielectric Analyzer With 8Channels Scanner(ACW,DCW,IR)
- 5880 Electrical Safety Compliance Analyzer (ACW,DCW,IR,GB)
- OPT5800-4 Scanner Channel to 4W+4G For 5880S
- OPT5800-8 Scanner Channel to 8W+8G For 5880S
- OPT5800-G GPIB Interface For 5800S
- 電源供應器測試解決方案
- 電氣安規測試解決方案
- 安規測試系統解決方案
- 家用電器測試解決方案
- 航空/軍用電源測試解決方案
- LED驅動電源測試解決方案
- 照明行業測試解決方案
- 交直流耐壓、絕緣阻抗、接地電阻測試
- 超大型240*128 Graphic LCD 視窗
- 可選配內建4組或8組高硬度矩陣式掃描通道
- 內建50組程式記憶、每組8個測試步驟可程式記憶步驟的連接測試
- 測試線路阻抗自我歸零校整功能，確保測試結果的準確
- 內建PLC Remote遙控界面
- 鍵盤鎖定功能
- 可選配GPIB/RS232 Interface Card