SKC DPM柴油采樣頭
美國SKC柴油顆粒物采樣盒DPM是專為采集空氣中呼吸性粉塵如煤塵,可用SKC DPM柴油采樣頭密封性防篡改,確保樣品的完整性。每個流線型塑料盒包括精密的石英孔,沖擊器撞擊基板,兩處石英濾波器,沖擊器篩選出大于等于1UM小于1mu的可吸入顆粒物在過濾器上。
通過采集的樣品分析有機碳元素含量,通過敏感的逸出氣體分析(EGA)技術和的熱光學分析儀,符合美國NIOSH 5040標準。
美國SKC DPM柴油采樣頭技術參數:
Performance Profi le
采樣盒尺寸:37mm
Cassette Size: 37 mm
過濾器:兩處熱處理的石英濾膜。
Filter: Two heat-treated quartz fi berwith cellulose support pad
過濾采集器:
Filter Collection
空間:8.04cm2
Area: 8.04cm2
沖擊器:四噴嘴,精密寶石孔
Impactor:Four-nozzle, precision sapphire orifices
流量:
Flow Rate:
采樣流速校準在1.7至2.0L/min之間,進行雅微顆粒采集。
Calibrated at 1.7 and 2.0 L/min for sampling of sub-micron particles
分析:
Analysis:
使用氣相色譜儀法(EGA)和熱光學分析法分析有機碳和碳元素。復合NIOSH 5040 標準。
For organic and elemental carbon using evolved gas analysis
(EGA) with thermal-optical analyzer (NIOSH Method 5040)
訂貨號:
Description | Pack Size | Part Number |
Cyclone cassette 25 mm for use with 225-69 | Each | 225-62 |
Cyclone cassette 37 mm for use with 225-69-37 | Each | 225-62-37 |
Rubber grit pots | 10 | 225-64 |
Stainless steel grids without tab 25 mm for use with 225-69 | 10 | 225-66 |
Stainless steel grids without tab 37 mm for use with 225-69-37 | 10 | 225-66-37 |
Filter transport cassette 25 mm | Each | 225-67 |
DPM plastic cyclone 37 mm | Each | 225-68 |
Plastic cyclone with 25 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69 |
Plastic cyclone with 37 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69-37 |
O-rings for Plastic Cyclone (set of 3) | Each | P22569 |
DPM cassette with 0.8 µm impactor | 10 | 225-317 |
Without impactor, standard 3-piece clear styrene cassette loaded with 37 mm heat-treated quartz filter, support pad, banded, meets NIOSH 5040 specifications | 50 | 225-401 |
GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 37 mm | Each | 225-100 |
GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 25 mm | Each | 225-103 |
GS-1 Single-inlet Cyclone includes bowl adapter, 37 mm cassette adapter, and grit pot | Each | 225-105 |
Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 25 mm | Each | 225-101 |
Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 37 mm | Each | 225-102 |
Three-piece Filter Cassette Blanks 37 mm | 10 | 225-3LF |
Three-piece Filter Cassette Blanks 25 mm | 50 | 225-3-25LF |
Filter Cassette/Cyclone Holder includes: 3 feet of 1/4 inch ID Tygon tubing and a 25 mm adapter ring, for attaching a DPM or standard filter cassette to a worker's clothing in the breathing zone. May be used with or without a cyclone, required when using the GS-1 Cyclone with the DPM Cassette | Each | 225-1 |