8
IKA懸臂攪拌器RW20
德國艾卡IKA RW20攪拌器特點：
- 新: 數字顯示
- With digital display
- 新: 強勁有力、豎長外形、人性化的設計
- Robust, slimline, ergonomic design
- 在可靠的RW20系列基礎上進行性能與技術改進
- Technical improvements on the trusted RW 20 series designs
- 馬達動力穩(wěn)定
- With constant power-drive
- 兩個速度檔位(高低速檔)，范圍為60-2000rpm
- Two speed ranges for universal use from 60 - 2.000 rpm
- 穿透式攪拌槳（僅當固定時）
- Push-through agitator shafts (only when stationary)
?
技術參數：
zui大攪拌量 (H2O) | 20 l |
Stirring quantity max. per stirring position (H2O) | 20 l |
電機輸入功率 | 70 W |
Motor rating input | 70 W |
電機輸出功率 | 35 W |
Motor rating output | 35 W |
轉速顯示 | LED |
Speed display | LED |
速度范圍 | 60 - 2000 rpm |
Speed range | 60 - 2000 rpm |
zui大粘度 | 10000 mPas |
Viscosity max. | 10000 mPas |
攪拌軸zui大輸出功率 | 26 W |
Output max. at stirring shaft | 26 W |
允許連續(xù)運轉時間 | 100 % |
Permissible ON time | 100 % |
攪拌軸zui大轉矩 | 150 Ncm |
Torque max. at stirring shaft | 150 Ncm |
在60轉時,攪拌軸zui大轉矩(過載) | 300 Ncm |
Torque max. at stirring shaft at 60 1/min (overload) | 300 Ncm |
|
|
在100轉時,攪拌軸zui大轉矩 | 150 Ncm |
Torque max. at stirring shaft at 100 1/min | 150 Ncm |
|
|
在1000轉時,攪拌軸zui大轉矩 | 24 Ncm |
Torque max. at stirring shaft at 1.000 1/min | 24 Ncm |
速度范圍 I (50 Hz) | 60 - 500 rpm |
Speed range I (50 Hz) | 60 - 500 rpm |
速度范圍 II (50 Hz) | 240 - 2000 rpm |
Speed range II (50 Hz) | 240 - 2000 rpm |
速度范圍 I (60 Hz) | 72 - 600 rpm |
Speed range I (60 Hz) | 72 - 600 rpm |
速度范圍 II (60 Hz) | 288 - 2400 rpm |
Speed range II (60 Hz) | 288 - 2400 rpm |
轉速控制 | 無級 |
Speed control | stepless |
轉速設置精度 | 1 ±rpm |
Setting accuracy speed | 1 ±rpm |
速度測量偏差 | 30 ±rpm |
deviation of speed measurement | 30 ±rpm |
攪拌槳固定 | 轉夾頭 |
Stirring element fastening | chuck |
溫度顯示 | 不 |
Temperature display | no |
轉夾頭夾持范圍zui小直徑 | 0.5 mm |
Chuck range min. diameter | 0.5 mm |
轉夾頭夾持范圍zui大直徑 | 10 mm |
Chuck range max. diameter | 10 mm |
空心軸，內徑 | 10.5 mm |
Hollow shaft, inner diameter | 10.5 mm |
空心軸(停止狀態(tài)可插入) | 是 |
Hollow shaft (push-through - when stopped) | yes |
支架固定 | 延長臂夾頭固定 |
Fastening on stand | extension arm |
延長臂直徑 | 13 mm |
Extension arm diameter | 13 mm |
延長臂長度 | 160 mm |
Extension arm length | 160 mm |
轉矩顯示 | 不 |
Torque display | no |
Speed control | 機械的 |
Speed control | mechanical |
額定轉矩 | 1.5 Nm |
Nominal torque | 1.5 Nm |
計時器 | 不 |
Timer | no |
外形尺寸 | 88 x 294 x 212 mm |
Dimensions (W x H x D) | 88 x 294 x 212 mm |
重量 | 3.1 kg |
Weight | 3.1 kg |
允許環(huán)境溫度 | 5 - 40 °C |
Permissible ambient temperature | 5 - 40 °C |
允許相對濕度 | 80 % |
Permissible relative humidity | 80 % |
DIN EN 60529 保護方式 | IP 20 |
Protection class according to DIN EN 60529 | IP 20 |