詳細介紹
RX-360SH自動熒光定硫儀
X-360SH 是按“能量色散X射線熒光光譜法(EDXRF) ”測定石油產品硫含量的儀器??赏ㄓ糜谲囉闷?,柴油,原油,石腦油,渣油,潤滑油基礎油,液壓油,噴氣燃料和其他餾分油在內的碳?xì)浠衔镏械牧蚝繙y(cè)定。適用于ISO 8754 ,ASTM D4294-03.,GB/T 17040的標準。測試過程簡單高效,試驗結果準確和重復性良好,是一種經濟的無損測試.方法。
HIGH PRECISION: Digital pulse height analysis is automatically carried out at each measurement to adjust the system. This innovative system design has further improved the precision.
高精度:RX-350是一種可移動的高精度硫分析儀,體積小巧,便于搬運,原來必須在實驗室是進行的硫分分析現在可通過直接在現場提取試樣,立即得到高精度的分析結果。分析場所有了飛躍性的擴大。
WIDE RANGE OF SAMPLES: Patented “Diamond Parameter Method” accuray compensates for measurement error caused by different carbon/hydrogen(C/H) ratio of individual sample. This state-of-art technology enabled measurement of wide range of samples of different C/H ratios with uncompromising precision.
測試范圍廣:*的技術 “Diamond Parameter Method”,無論是輕油,原油,重油。從低濃度到高濃度,均能在短時間內通過簡單的操作,高精度地測出硫分值。對于不同的碳?xì)浠衔铮?/span>C/H)也能自動補正
AMBIENT TEMPERATURE AND BAROMETRIC PRESSURE COMPENSATION: Compensation for ambient temperature and barometric pressure are made automatically to drastically minimize the drift. 對于環境的影響,可通過氣壓補正,溫度補正進行自動調整。
RX-360SH自動熒光定硫儀
AUTOMATIC CALIBRATION: Set certified calibration standards and start automatic calibration program to carry out automatic calibration. Either multiple point calibration at up to 10 points or two points calibration starts.
用標準樣品校正時,可自動進行多點(zui多到10點)的補正。
EASY OPERATION: Minimum numbers of membrane switches are located on the operation panel along with an LCD for easy dialogue type operation.
整個試驗過程和采集的數據,可在LCD 上清晰顯示。
COMPACT DESIGN/2-WAY POWER SOURCE: Compact design unit with carrying handle and 2-way power
RX-350是一種可移動型的高精度硫分析儀,體積小巧,便于搬運,可使用2種方式供電。可通過直接在現場提取試樣,立即得到高精度的分析結果
source (100-240VAC*1 or 12VDC battery*2) allows such applications as spot-checking in the field.
*1: When used with the provided AC Adapter (100-240V AC 交流電源)
*2: When used with optional 12VDC cord with lighter plug (車載12 V 蓄電池直流電)
LOWER RUNNING COST: The Teflon sample cell is permanent and used with a small piece of disposable Mylar film. The only other consumable is the printing paper, making the running cost at minimal.
運行維護成本低:試驗儀器所有的配件中只有“測試膜”和“打印紙”是易耗品,日常使用和運行維護成本很低。
TYPE:
Total sulfur analyzer for petroleum products by energy-dispersive X-ray fluorescence method
用非色散X射線熒光光譜分析法測定石油產品中硫含量
CONFORMING STANDARDS: (適用標準)
ISO 8754, ASTM D4294-03, GB/T 17040 etc.
NUMBER OF TEST:
One(1) (單樣品測試)
SAMPLE VOLUME: (樣品需求)
3-5ml (每次測試只需要3-5ml)
MEASURING RANGE: (硫含量測試范圍)
0-6.00wt%
REPEATABILITY: (Typical) 結果重復性
Range(范圍) | Std Deviation(標準誤差) | Measuring Time(測試計數) |
0.008wt%max | 5ppm | 300sec x 3times(300秒測試3次) |
0.05wt%max | 10ppm | 100sec x 3times |
0.05-0.50wt% | 20ppm | 100sec x 3times |
0.51-1.50wt% | 30ppm | 100sec x 3times |
1.51-2.00wt% | 50ppm | 100sec x 3times |
2.01-4.00wt% | 100ppm | 100sec x 3times |
4.01-6.00wt% | 200ppm | 100sec x 3times |
C/H RATIO COMPENSATION: (C/H補正誤差)
Automatic with 0.003wt% max of compensation error when a 1wt% sample is tested.
MEASURING TIME: (測試方式)
10-300sec with a 10sec increment. 1-99 times. (測試時間10-300秒,每10秒為一單位設定,可設定重復測試 1-99 次)
CALIBRATION: (儀器標定方式)
*Automatic two point calibration 自動2點標定
*Manual two point calibration 手工2點標定
*Automatic multiple-point calibration(up to 10 points) 自動多點標定(zui多10點)
*Manual multiple-point calibration(up to 10 points) 手工多點標定(zui多10點)
X-RAY SOURCE: (x射線源功率)
X-ray tube operated at 7kV-0.15mA
SAMPLE CUP: 樣品杯
2-piece Teflon cup with disposable Mylar film(2個聚四氟乙烯樣品底座+一次性(Mylar)分子薄膜)
PRINTER: (打?。?/span>
Built-in impact dot matrix printer (W57mm) (內置點式打印機,紙寬57mm)
DISPLAY: (顯示屏)
LCD (20 characters x 4 lines) LCD可顯示20字符,4行
X-RAY LEAKAGE: (x射線源外散)
0.6 micro Sv/Hr or less on instrument surface (經測試,儀器表面小于0.6 micro Sv/Hr)
DATA OUTPUT: (數據輸出)
RS-232C 1 channel (標準RS-232C接口,1)
OPARATING TEMPERATURE/HUMIDITY: (環境要求)
10-30℃ with a temperature drift within 10oC in a day. RH to be within 80%.
室溫10~30℃(一天內的溫差變化在10℃以下) / 濕度80‰ RH以下
POWER SUPPLY: (電源需求)
DC12V (with the provided AC Adapter or optional 12VDC cord with lighter plug)
外置DC 12V(直流)電源(帶交流電源適配器或車載電源適配器)
SAFETY: (安全防護)
Interlock mechanism against accidental X-ray leakage (雙重保險設計,有效避免 x射線泄露)
DIMENSIONS/WEIGHT: 尺寸/重量
(測試部)Test head: 420mmW x 350mmD x140mmH/11kg
(電源部)AC Adapter: 50mmW x 115mmD x 25mmH/0.25kg
?STANDARD ACCESSORIES: (標準附件)
1.AC Adapter 交流電源適配器 | 1 |
2.Teflon sample cells (5pcs/box) 樣品杯組(5個/組) | 1組 |
3.Sample cell assembling jig 樣品杯組裝工具 | 1 |
4.Sample cell disassembling jig 樣品杯分解工具 | 1 |
5.Sample cell stand 樣品杯底座 | 1 |
6.Mylar film (200mm x 1,000m) 樣品膜(200mmX1,000米) | 1 |
7.Printer roll paper 打印紙 | 3 |
8.Spare Printer ink ribbon 備用打印機色帶 | 1 |