首頁 >> 供求商機
Conoptics是光學和激光附件制造業(yè)的，開發(fā)了一套用于多光子顯微鏡的電光調制器。
多光子熒光顯微鏡結合了*進的激光掃描顯微鏡技術，使用紅外波長獲取更高分辨率的三維圖像，多光子熒光顯微鏡是非常實用的研究工具。
Conoptics調制器采用KD*P晶體，光束從中心入射，中心出射，標準的波長范圍從700nm到1100nm。電源使用Model 302RM，擁有1us的上升和下降沿的時間，可作為一個250KHz高速開關，并且可作為一個強度調制器。
用于雙光子顯微鏡的電光調制器系統(tǒng)
調制器參數：
Aperture | 3.5mm |
Dimensions | 50mm Diameter * 135mm |
Transmission | >90% |
Standard Wavelength Ranges | 700-1100nm |
Piezo Resonances | Minimal with clamped version(BK option) |
Driver Compatibility | Full modulation with M302 Power Amplifier up to 1064nm |
放大器參數：
Cabinet | Driver and power supply in single cabinet |
Test Feature | Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage |
DC Bias | Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages |
Voltage Range | +/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator |
Linearity | 10bits referenced to full scale (.1%) |
Bandwidth | DC to >200Khz with 90pf load and 3M (RG-62) cables |
Max. Output Drive Level | 750VP-P into 90pf load |
Amplifier Input Signal | 2VP-P max into 50/1K ohms delivers 750VP-P out |
Input Signal Format | Options include Unipolar positive, negative or bipolar |
Input Power (AC) | 60W typical. Input power is both load (modulator) and frequency dependent. |
Dimensions | 19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm) |
Cooling | Forced air |
Operating Environment | Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M |
Weight | 20lbs (9.07kg) |
8